Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 565)

Brocade 6910 Ethernet Access Switch Configuration Guide 515
53-1002581-01
LLDP Commands
24
lldp dot3-tlv link-agg
This command configures an LLDP-enabled port to advertise link aggregation capabilities. Use the
no form to disable this feature.
Syntax
[no] lldp dot3-tlv link-agg
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises link aggregation capabilities, aggregation status of the link, and the 802.3
aggregated port identifier if this interface is currently a link aggregation member.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot3-tlv link-agg
Console(config-if)#
lldp dot3-tlv mac-phy
This command configures an LLDP-enabled port to advertise its MAC and physical layer
capabilities. Use the no form to disable this feature.
Syntax
[no] lldp dot3-tlv mac-phy
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises MAC/PHY configuration/status which includes information about
auto-negotiation support/capabilities, and operational Multistation Access Unit (MAU) type.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot3-tlv mac-phy
Console(config-if)#