Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 776)

726 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
IEEE 802.1Q VLANs
34
Interface
To configure static members by the VLAN index:
1. Click VLAN, Static.
2. Select Edit Member by VLAN from the Action list.
3. Set the Interface type to display as Port or Trunk.
4. Modify the settings for any interface as required.
5. Click Apply.
FIGURE 78 Configuring Static Members by VLAN Index
To configure static members by interface:
1. Click VLAN, Static.
2. Select Edit Member by Interface from the Action list.
3. Select a port or trunk configure.
4. Modify the settings for any interface as required.
5. Click Apply.