AirLive WLA-9000AP - Manual (Page 102)

6. Command Line Interface
95 AirLive WLA-9000AP User’s Manual
In this chapter, we will explain commands that are available through Telnet or SSH
interface. We will provide descriptions for the commands, example settings and the
WLA-9000AP’s response. The purpose for this chapter is to introduce available CLI
commands only. For detail descriptions on the concept and application of the settings,
please refer to chapter 4 and chapter 5.
Before reading this chapter, please go through Section 3.3 of Chapter 3. It contains
information on how to login Telnet or SSH/SSH2 interface. For quick reference, the login
and password is as bellowed:
„
Telnet
‰ Password: airlive
„
SSH/SSH2
‰ First login
z Login: root
z Password: <nothing, just press enter>
‰ Second login:
z Password: airlive
When you change WLA-9000AP’s password, it will change the second login’s
password only.
You can get a list of available commands by typing “help” at the command prompt.
You must remember to save the configurations by typing “save
config
” at the command prompt after making changes, otherwise, the
configuration will be lost after reboot.
6
6.
Command Line Interface