AirLive WLA-9000AP - Manual (Page 27)

3. Configuring the WLA-9000AP
AirLive WLA-9000AP User’s Manual 20
„ Wireless Settings: Click on this part will bring you to the wireless operation mode
menu. The WLA-9000AP’s wireless settings are different between wireless
modes. Only functions that are applicable to the wireless mode will show to
simplify configuration. For example, multiple SSID option is only workable for
Access Point and AP Router mode. Therefore, the function will only appear in
these 2 modes. For this reason, the first step to configure the WLA-9000AP is to
select the wireless mode. The router mode specific functions are also in this
menu category. For explanation of different wireless modes, please refer to
Chapter 1.
„ System Configuration: All non-wireless and router mode settings are in this
category. The system configurations including changing password, upload
firmware, backup configuration, settings PING watchdog, and setting management
interface. The default management timeout is 10 minutes; we recommend you
should change password and management timeout during the first time login.
„ Device Status: This section for monitoring the status of WLA-9000AP. It provides
information on device status, Ethernet status, wireless status, wireless client table,
and system log.
„ Help: This is the online help system for quick reference. We still recommend you
to read this user’s guide for more information.
TIPS: You can choose any menu categories to begin; you can switch to other menu later
When you choose one of the menu categories, the WLA-9000AP will require you to enter
the username and password. Please enter “airlive” (all lower cases) for both username
and password.