AirLive WLA-9000AP - Manual (Page 103)

6. Command Line Interface
AirLive WLA-9000AP User’s Manual 96
6.1 System Commands
„
ping <IP address
>
‰ Purpose: to ping a remote IP address
‰ Example:
Command> ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=1.8 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.0 ms
„
change password
‰ Purpose: Change login password
‰ Example:
Command> change password 123
password is set to: 123
„
ftptest <ssid> 11a <channel>
‰ Purpose: Test if a SSID’s connection is okay
‰ Example:
Command> ftptest airlive 11a 40
Set SSID : airlive , mode = 11a , channel = 40 ok !
„
save config
‰ Purpose: save configuration file. Please remember to “save config” after
making changes
‰ Example:
Command> save config
None
„
clear config
‰ Purpose: Clear configuration to default
‰ Example:
Command> clear config
This is the command
Here explains the usage
of the command
Example
command and
response