AirLive WLA-9000AP User Manual
Page 91
5. Web Management 2: System Configuration and Status
AirLive WLA-9000AP User’s Manual
84
System Administration
HTTP Port No
: The default port for HTTP is Port 80, you can change the value
here
Timeout
: The default management timeout is 10 minutes. After timeout, the
WLA-9000AP will ask you to login again. You can change the timeout value
here.
Web Server Access
: You can enable or disable HTTP service from WAN side
Response to WAN ping
: You can disable or enable whether WLA-9000AP will
response to PING command.
UPnP
: Click here to enable UPnP. It is recommended not to open UPnP for security
reason.
Syslog:
Syslog is an IETF (Internet Engineering Task Force - the Internet standards
body)-conformant standard for logging system events (RFC-3164). When the
WLA-9000AP encounters an error or warning condition (ie., a log-in attempt with an
invalid password), it will create a log in the system log table. To be able to remotely view
such system log events, you need to check the Enable Syslog box and configure the IP
address of a Syslog daemon. When doing so, the WLA-9000AP will send logged events
over network to the daemon for future reviewing.