AirLive WLA-9000AP - Manual (Page 122)

6. Command Line Interface
115 AirLive WLA-9000AP User’s Manual
„
set security <ssid> <wpa|wpa2> <tkip|aes|both> interval <0~300>
‰ Purpose: to set the WPA or WPA2 security policy
‰ Example:
Command> set security WLA-9000AP wpa2 tkip interval 300
Radio1 authentication type : wpa2 !
„
set security <ssid> <wpa-psk|wpa2-psk> <tkip|aes|both> interval
<0~300> <key string>
‰ Purpose: to set the WPA-PSK or WPA2-PSK security policy
‰ Example:
Command> set security WLA-9000AP wpa2-psk aes interval 300 12345678
Radio1 authentication type : wpa2-psk !
„
set antenna <diversity | vertical | horizontal >
‰ Purpose: To set the antenna to use horizontal, vertical, diversity polarizations.
‰ Example:
Command> set antenna horizontal
Antenna setting is Horizontal
„
set ratemode <full | half | quarter>
‰ Purpose:
‰ Example:
Command> set ratemode full
Rate mode is Full(20Mhz)
„
set noise immunity <on | off>
‰ Purpose: To enable/disable the noise immunity level
‰ Example:
Command> set noise immunity on
Noise immunity is enable