AirLive WLA-9000AP - Manual (Page 30)

3. Configuring the WLA-9000AP
23 AirLive WLA-9000AP User’s Manual
Follow the example below to change to “Client Infrastructure” mode
1. Select “Duplex” mode.
2. Click on “change mode” button
3. The AP will reboot, wait for about one minute
3.5.2 Change the Device’s IP Address
The default IP address is at 192.168.1.1. You should change it to the same subnet as
your network. Also, if you want to manage WLA-9000AP remotely, you have to set the
Gateway and DNS server information.
To setup the IP settings for WLA-9000AP, please select “System Configuration” -> Device
2
1