Installing the wla-9000ap, 2 before you start, 3 installing wla-9000ap – AirLive WLA-9000AP User Manual
Page 13
2. Installing the WLA-9000AP
AirLive WLA-9000AP User’s Manual
6
2
2.
Installing the
WLA-9000AP
This section describes the hardware features and the hardware installation procedure for
the WLA-9000AP. For software configuration, please go to chapter 3 for more details.
2.2 Before You Start
It is important to read through this section before you install the WLA-9000AP.
The WLA-9000AP comes with everything you need to start installation with
exception of the PoE Ethernet Cable. You can use a good quality CAT-5E
outdoor graded Ethernet cable (shielded with anti-UV) according to the length
you need.
The use of 5GHz spectrum, Turbo modes, and 5/10MHz channel bandwidth
might be prohibited in some countries. Please consult with your country’s
telecom regulation first.
You must set the distance parameter to make long distance connection work.
Please refer to chapter 4 of this user’s guide for details.
2.3 Installing WLA-9000AP
The WLA-9000AP package contains the following items:
z
One WLA-9000AP main unit
z
One 5.5V 2.5A DC power adapter
z
Indoor detachable Omni Antenna x 2
z
One CD of the WLA-9000AP Quick Start Guide