AirLive WLA-9000AP - Manual (Page 19)

3. Configuring the WLA-9000AP
AirLive WLA-9000AP User’s Manual 12
center of your wireless network, with line of straight to all your wireless stations. Also,
remember to adjust the antenna; usually the higher the antenna is placed; the better will be
the performance.
3.2 Prepare Your PC
The WLA-9000AP can be managed remotely by a PC through either the wired or wireless
network. The default IP address of the WLA-9000AP is 192.168.1.1 with a subnet mask of
255.255.255.0. This means the IP address of the PC should be in the range of
192.168.1.2 to 192.168.1.254.
To prepare your PC for management with the WLA-9000AP, please do the following:
1.
Connect your PC directly to the LAN port on the DC Injector of WLA-9000AP
2.
Set your PC’s IP address manually to 192.168.1.100 (or other address in the same
subnet)
You are ready now to configure the WLA-9000AP using your PC.
3.3 Management Interface
The WLA-9000AP can be configured using one the management interfaces below:
Web Management (HTTP):
You can manage your WLA-9000AP by simply typing its
IP address in the web browser. Most functions of WLA-9000AP can be accessed by
web management interface. We recommend using this interface for initial