AirLive WLA-9000AP - Manual (Page 18)

3. Configuring the WLA-9000AP
11 AirLive WLA-9000AP User’s Manual
3
3.
Configuring the
WLA-9000AP
The WLA-9000AP offers many different types of management interface. You can configure
through standard web browser (http), secured web (https), command line (telnet), secured
command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain
WLA-9000AP’s available management interfaces and how to get into them. Then, we will
provide the introduction on Web Management and recommended initial settings.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the password and SSID
are case sensitive.
Default Value Settings
Wireless1 Wireless2
Device Name
WLA-9000AP
Radio
802.11a 802.11a
SSID
airlive1 airlive2
Channel
36 36 (auto in 802.11b/g)
WEP
Disabled
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
DHCP Server
Disabled. Available and default enabled when each of
the wireless is configured as a gateway.
DHCP IP Range
192.168.1.2 ~ 192.168.1.254
Access Password
airlive
Note:
Before you starting hardware connection, you are advised to find an appropriate
location to place the Access Point. Usually, the best place for the Access Point is at the