4 set commands – AirLive WLA-9000AP User Manual
Page 113
Advertising
6. Command Line Interface
AirLive WLA-9000AP User’s Manual
106
Lan ip dnsserv : 0.0.0.0
show firmware version
show vlan ssid list
show wds settings
show advanced wireless
show syslogd
show antenna
Purpose: Check antenna polarization
Example:
Command> show antenna
Antenna setting is Vertical;
show ratemode
Purpose: Show whether the AirMax is using 5MHz, 10MHz, or 20MHz
channel width
Example:
Command> show ratemode
Ratemode is Full(20Mhz);
show noise immunity
Purpose: Show the noise immunity setting
Example:
Command> show noise immunity
Noise immunity is enable
6.4 Set Commands
The Set Commands are to make changes to the WLA-9000AP’s settings
Advertising