AirLive WLA-9000AP - Manual (Page 39)

4. Web Management: Wireless and WAN Settings
AirLive WLA-9000AP User’s Manual 32
4.2.1 Network SSID
Operation Mode -> Setup -> Network SSID
The SSID is the network name used to identify a wireless network. The SSID must be the
same for all devices in the same wireless network. In WLA-9000AP; it is possible to
create more than one SSID in AP and AP Router mode, please check the “Multiple SSID &
VLAN” section in this chapter. Conversely, several access points on a network can have
the same SSID. The SSID length is up to 32 characters. The default SSID is “airlive”.
„
Enable Radio 1/2: The default wireless is on. You can uncheck this box to disable
wireless interface.
„ Disable SSID Broadcasting: If you check this box, the SSID will be hidden; only users
who know the SSID can associate with this network.
4.2.2 Site Survey
Operation Mode -> Setup -> Site Survey
The Site Survey function in WLA-9000AP provides 4 important functions
„
In Client and Bridge Infrastructure mode, site survey will scan for available AP network.
Then allow user to select and connect to the AP. This greatly simplify the installation
„ Once Site Survey displays the available AP or Bridge networks, you can select a
particular SSID to display its RSSI value continuously. This function is called “Signal
Survey”. Signal Survey can be used for antenna alignment. For detail explanation
of about RSSI value, please visit “How to Make Antenna Alignment” Chapter.