AirLive WLA-9000AP - Manual (Page 24)

3. Configuring the WLA-9000AP
17 AirLive WLA-9000AP User’s Manual
To get a list of available command and their usage, please type “help” on the
command prompt.
SNMP Management
: The WLA-9000AP support SNMPv1/v2 management. If
you have SNMP management software, it can manage the WLA-9000AP. The
WLA-9000AP’s SNMP support is as followed:
‰ SNMP v1/v2 support
‰ SNMP Read/Write Community String
‰ SNMP Trap support
‰ MIB and MIB II Support
‰ Ether-like MIB
‰ IEEE802dot11 MIB
‰ Private MIB
3.4 Introduction to Web Management
The WLA-9000AP offers both normal (http) and secured (https) Web Management
interfaces. Their share the same interface and functions, and they can both be accessed
through web browsers. The only difference is HTTPS are encrypted for extra security.
Therefore, we will discuss them together as “Web Management” on this guide.
3.4.1 Getting into Web Management
Normal Web Management (HTTP)
To get into the Normal Web Management, simply type in the WLA-9000AP’s IP address
(default IP is 192.168.1.1) into the web browser’s address field.
Secured Web Management (HTTPS)
For more information about Telnet and SSH configuration, please go to
Chapter 7 Command Line Interface
.