AirLive WLA-9000AP - Manual (Page 107)

6. Command Line Interface
AirLive WLA-9000AP User’s Manual 100
HTTP service port: 80
HTTP session timeout: 10 minutes
„
show upnp
‰ Purpose: Show UPnP information
‰ Example:
Command> show upnp
UPnP is disabled
„
show mac
‰ Purpose: show the MAC address table in MAC filter mode. This might
change to show the wireless MAC address of WLA-9000AP in future firmware
release
‰ Example:
Command> show mac
Filter Name MAC address
------------------------------------------------------
ailrive 00-4f-62-24-12-34
„
show mac filter
‰ Purpose: show mac address table in the Access Control List
‰ Example:
Command> show mac filter
Filter Name MAC address
-------------------------------------------------
hello 00-4f-62-24-12-34
airlive 00-4f-62-24-11-11
„
show mac filter mode
‰ Purpose: Show whether the current MAC address is enable or not