AirLive WLA-9000AP - Manual (Page 118)

6. Command Line Interface
111 AirLive WLA-9000AP User’s Manual
„
set <enable | disable>
‰ Purpose: Enable or Disable the wireless interface
‰ Example:
Command> set enable
Radio1 enabled
„
set ssid <ssidname>
‰ Purpose: Replace current main SSID name with a new one
‰ Example:
Command> set ssid WLA-9000AP
„
set ssid remotessid <remote ssidname> Repeater Mode Only
‰ Purpose: Set the remote SSID name for repeater mode
‰ Example:
Command> set ssid remotessid airlive2
„
set broadcast <enable | disable>
‰ Purpose: Enable or disable SSID broadcast
‰ Example:
Command> set broadcast enable
Radio1 broadcast enabled
„
set radio mode <radio mode value>
‰ Purpose: set radio mode to 11a | supera_no_turbo | supera_static_turbo.|
supera_dynamic_turbo
‰ Example:
Command> set radio mode supera_no_turbo
Radio1 radio mode: supera_no_turbo