AirLive WLA-9000AP - Manual (Page 83)

4. Web Management: Wireless and WAN Settings
AirLive WLA-9000AP User’s Manual 76
„ Dynamic Routing:
Select the routing protocol scheme used for the router’s LAN / WAN port.
„ Static Routing:
This allows you to manually configure static network routes. Static routes will override
routes learned by standard routing protocol discover methods.
„ IP Routing Table:
To delete a static route from the table, select the route and click DELETE SELECTED.
Note: Changes to the routing table will take effect immediately.
4.6.8 Dynamic DNS Settings
Operation Mode -> Setup -> Dynamic DNS Settings
Dynamic DNS (DDNS) allows you to create a hostname that points to your dynamic IP or
static IP address or URL. WLA-9000AP provide Dynamic DNS client using DynDNS, please
visit
http://www.dyndns.org for detail.
4.6.9 Remote Management Settings
Operation Mode -> Setup -> Remote Management
Remote Management allows administrator to manage the WLA-9000AP from WAN side.
You can also change the management port and other settings here.
„
HTTP Port No: The default port for HTTP is Port 80, you can change the value here
„ Timeout: The default management timeout is 10 minutes. After timeout, the
WLA-9000AP will ask you to login again. You can change the timeout value here.