ElmoMC Gold Line Digital Servo Drives-Gold Drum Ver 1_400 D-Sub connectors - Manual (Page 5)

Gold Drum (D-Sub Connectors) Installation Guide
MAN-G-DRUM(DTYPE)IG-EC (Ver. 1.400)
|Warnings| www.elmomc.com
5
Table of Contents
Chapter 1: This Installation Guide
The Gold Drum offers two optional connector types: Gold Drum with RJ-45 Connectors and Gold
Drum with D-Type Connectors. This installation Guide details the technical data, pinouts, and power
connectivity of the Gold Drum with D-Type connections. For a comprehensive detailed description
of the functions refer to the MAN-G-Panel Mounted Drives Hardware manual which describes Panel
Mounted products.
Chapter 2: Safety Information
In order to achieve the optimum, safe operation of the Gold Drum, it is imperative that you
implement the safety procedures included in this installation guide. This information is provided to
protect you and to keep your work area safe when operating the Gold Drum and accompanying
equipment.
Please read this chapter carefully before you begin the installation process.
Before you start, ensure that all system components are connected to earth ground. Electrical
safety is provided through a low-resistance earth connection.
Only qualified personnel may install, adjust, maintain and repair the servo drive. A qualified person
has the knowledge and authorization to perform tasks such as transporting, assembling, installing,
commissioning and operating motors.
The Gold Drum contains electrostatic-sensitive components that can be damaged if handled
incorrectly. To prevent any electrostatic damage, avoid contact with highly insulating materials,
such as plastic film and synthetic fabrics. Place the product on a conductive surface and ground
yourself in order to discharge any possible static electricity build-up.
To avoid any potential hazards that may cause severe personal injury or damage to the product
during operation, keep all covers and cabinet doors shut.
The following safety symbols are used in this and all Elmo Motion Control manuals:
Warning:
This information is needed to avoid a safety hazard, which might cause bodily injury
or death as a result of incorrect operation.
Caution:
This information is necessary to prevent bodily injury, damage to the product or to
other equipment.
Important:
Identifies information that is critical for successful application and understanding of
the product.