ElmoMC SimplIQ Digital Servo Drives-Trombone DC - Manual (Page 17)

DC Trombone Installation Guide Installation
MAN-DCTROIG (Ver. 1.601)
www.elmomc.com
17
3.1.2. Hardware Requirements
The components that you will need to install your DC Trombone are:
Component Connector Described
in Section
Diagram
Main Power Cable PE VN- VP+ 3.6.4
Motor Cable M3 M2 M1 PE 3.6.3
Backup Supply Cable
(needed for S type drive) VL+ VL- 3.6.7
Main Feedback Cable MAIN FEEDBACK
(FEEDBACK A)
3.7.1
Auxiliary Feedback Cable
(if needed) AUX. FEEDBACK
(FEEDBACK B)
3.7.3.2