ElmoMC SimplIQ Digital Servo Drives-Trombone DC - Manual (Page 44)

DC Trombone Installation Guide Installation
MAN-DCTROIG (Ver. 1.601)
www.elmomc.com
44
3.7.2. Main and Auxiliary Feedback Combinations
The Main Feedback is always used in motion control devices, whereas the Auxiliary Feedback is
often, but not always used. The Auxiliary Feedback connector on the DC Trombone,
FEEDBACK B, has two ports, Port B1 and Port B2. When used in combination with the
FEEDBACK A, these ports can be set, by the software, as follows:
Port