ElmoMC SimplIQ Digital Servo Drives-Trombone DC - Manual (Page 3)

Revision History
Version Date Details
Ver. 1.0 Initial release
Ver. 1.1 Updated with new template
Ver. 1.2 Changes and updates to the following sections:
2.1, 2.2.6, 2.2.7, 2.3, 3.0, 3.11, 3.3.1, 3.4, 3.5, 3.5.2, 3.6, 3.7,
3.8, 3.9, 3.10, 4.1, 4.1.7, 4.3, 4.4.1, 4.6, 4.7
Ver. 1.3 Sections 4.3, 4.4.1: Auxiliary supply range: 18 to 30 V
Ver. 1.4 September 2012 Change the overvoltage in 800 V mode, Pin layout, UL
recognition, and further optional versions added
“Metronome” was replaced by the “Composer” software.
Ver. 1.401 February 2013 Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
Ver. 1.500 May 2013 Addition of heat-sink option to lower side of the drive.
Ver. 1.600 June 2014 Manual updated
Ver. 1.601 July 2014 General format updates