ElmoMC SimplIQ Digital Servo Drives-Trombone DC - Manual (Page 21)

DC Trombone Installation Guide Installation
MAN-DCTROIG (Ver. 1.601)
www.elmomc.com
21
3.4. Mounting the DC Trombone
The DC Trombone has been designed for two standard mounting options:
• Wall Mount along the back (can also be mounted horizontally on a metal surface)
• Book Shelf along the side
M4 round head screws, one through each opening in the heat sink, are used to mount the DC
Trombone (see the diagram below).
Figure 2: Mounting the DC Trombone with L-shaped Heat-sink