Lenze E94AxHE Technology Application Positioning sequence control - Manual (Page 31)

EDS94TA10060xxxx EN 1.2 - 03/2010
L
31
9400 Technology applications | Positioning sequence control
Parameter setting & configuration
Basic settings
5.2.3 Position control
In the dialog level Overview  LS_Positioner and the subordinate dialog levels, you can
adapt the parameters for the position control, if necessary.
Parameter Lenze setting
Value Unit
C00254 Phase controller gain 20.00 1/s
C02553 Position controller gain 20.00 1/s
C02556 Position controller limitation 214748.3647 unit/s