1 overview of action types – Lenze E94AxHE Technology Application Positioning sequence control User Manual
Page 33
EDS94TA10060xxxx EN 1.2 - 03/2010
L
33
9400 Technology applications | Positioning sequence control
Parameter setting & configuration
Program flow
5.3.1
Overview of action types
Action type
Function/parameter
Homing
In order to execute a homing process, the action type "Homing" is available which activates the basic
function "Homing".
Note: The "Homing" action does not have its own parameters. The settings for homing are made via
the parameters of the basic function "Homing".
Positioning
To execute a profile, 50 actions of the "Positioning" type are available.
• The execution of the adjusted profile is only started with activated waiting function if the
sequencer input selected for the waiting function accepts the selected signal state.
Parameter
Information
C04513/1...50
Profile number
Specification of the profile to be executed.
• Press the "Set up profile" button to open a dialog box to
enter the corresponding profile parameters.
• In this dialog a sequence profile can also be set.
C04511/1...50
Input for waiting
function
Sequencer input 1 ... 32 to be evaluated.
• With the default setting "0" the waiting function is
skipped and the profile execution is started immediately.
C04512/1...50
Signal state for
waiting function
Profile processing is only started when the sequencer input
to be evaluated is in this state.
C04514/1...50
Sequence step
Step inside the sequence table which will be processed after
the profile has been executed.
C04515/1...50
Watchdog time
Monitoring time within which positioning must be
completed. Otherwise, a branch to the watchdog sequence
step defined in C04516 is executed.
C04516/1...50
Watchdog
sequence step
Executed when the watchdog time has expired.
Branching
25 actions of type "Branching" are available for conditional and unconditional branches (jumps).
• A branch to the indicated step is executed when the selected sequencer input has the selected
signal state at the time of processing. If not, the sequence step is processed in the sequence
Parameter
Information
C04530/1...25
Input for
comparison
Sequencer input 1 ... 32 to be evaluated.
• With the default setting "0" a branch to the adjusted
sequence step is executed.
C04531/1...25
Comparison
value
State in which the sequencer input to be evaluated is
compared.
C04532/1...25
Sequence step in
case of equality
If the sequencer input to be evaluated equals the
comparison value, a branch to the step set here is executed.
In case of inequality or "0" setting, the next step in the
sequence table is processed.
0
1