MacDon Transport D60 - Manual (Page 13)

FRONT AXLE
Form 147398 11 Revision J
h. If not factory installed, attach tension link (K) to
pivot pin with 5/8 NC X 1.375 LG shoulder bolt (L),
washer (M) and locknut. Install washer (M)
between link and pin and tighten.
i. Install spring (N), tensioner bolt (O), washer (P),
nut (Q), and jam-nut (R). Spring is tensioned
later.
j. The axle is now in transport position.
L
M
K
N
Q
O
P
R