Step 9. install wheels – MacDon Transport D60 User Manual

Page 26

Advertising
background image

REAR AXLES AND WHEELS

Form 147398

24

Revision J

STEP 9. INSTALL WHEELS

a. Attach the four wheels to hubs with bolts

provided in hubs.

b. Torque wheel bolts to 80-90 ft·lbf (110-120 N·m).

Refer to bolt tightening sequence illustration.

c. Check tire inflation pressure. Inflate to 65 psi (448

kPa).

IMPORTANT

Do not exceed maximum pressure
specified on tire side wall.

d. Height adjustment procedures when the stabilizer

wheels are in field mode are provided in “D50 and
D60 Harvest Header/FD70 FlexDraper Operator’s
Manual”.


1

2

3

4

5

6

Advertising
This manual is related to the following products: