MacDon Transport D60 - Manual (Page 43)

TOW-BAR
Form 147398 41 Revision J
II. 30 FT WINDROWER
a. Install cradle assembly (A) to back-tube multi-
coupler support as shown using two
3\8 NC X 1.0 LG carriage bolts and flanged
smooth face lock-nuts at (B).
NOTE
For 2009 and earlier model headers, locate
cradle assembly (A) on back-tube as shown
and drill two mounting holes in support with
a 3/8 inch drill.
b. Tighten hardware.
5.50 in. (139 mm)
1.25 in. (32 mm)
7º
FLUSH A
A
B