MacDon Transport D60 - Manual (Page 39)

TOW-BAR
Form 147398 37 Revision J
STEP 14. INSTALL TOW-BAR
BRACKETS
The tow-bar is stored on the header just behind
the back-tube. It is secured to each endsheet with
a bracket and to the back-tube with two cradles.
A. ENDSHEET BRACKETS
a. At the left endsheet inboard side, install bracket
(A) on channel with two 3/8 NC X 0.75 LG
carriage bolts (B) and flanged smooth faced nuts.
NOTE
For 2009 and earlier model headers, locate
bracket (A) on endsheet as shown and drill
two mounting holes in endsheet brace with
a 3/8 inch drill.
b. At the right endsheet inboard side, install bracket
(C) on channel with two 3/8 NC X 0.75 LG
carriage bolts (D) and flanged smooth faced nuts.
LEFT ENDSHEET
A
2-3/16 in. (55 mm)
B
LEFT ENDSHEET
RIGHT ENDSHEEET
C
D