MacDon Transport D60 - Manual (Page 38)

SAFETY SIGNS
Form 147398 36 Revision J
STEP 13. INSTALL SMV SIGN
a. On D60 Harvest Headers, remove reel brace
upper bolt (A) from right-hand reel arm.
b. Install SMV reflector support (B) on outboard side
of reel arm with bolt (A) and nut removed in
previous step. Do not install the washer. Torque
to 75 ft·lbf (102 N·m). Proceed to step e.
c. On FD70 FlexDraper headers, install SMV
reflector support (B) on outboard side of right-
hand reel arm with ½ NC X 3.25 LG bolt (C) and
nut. Tighten bolt. Proceed to step e.
d. On D50 Harvest Headers, install SMV reflector
support (A) on right-hand reel arm with two
3/8 NC X 0.625 LG self-tapping screws (D).
e. Install SMV reflector (E) onto support with two
3/8 NC X 0.625 LG self-tapping screws (E).
D50
E
F
D60 & FD70
E
F
D60
B
A
FD70
C
B
D50
A
D