MacDon Transport D60 - Manual (Page 34)

LIGHTS
Form 147398 32 Revision J
D. CONNECT HARNESS
I. NORTH AMERICA/AUSTRALIA/CIS (WITH
MODULE)
a. Remove cap from connector (A) on existing
harness and attach connector to light module
connector (B).
b. Connect light harness flat connector (C) to light
module connector (D).
c. Connect light harness square connector (E) to
light square connector (F).
d. Bundle harnesses into light fixture and secure with
clamp (G).
e. Attach cover (H) and tighten screws (J).
II. EUROPE AND OTHER EXPORT
(WITHOUT MODULE)
a. Remove cap from connector (K) on existing
harness and attach connector to light harness
connector (L).
b. Connect light harness square connector (M) to
light square connector (N).
c. Bundle harnesses into light fixture and secure with
clamp G.
d. Attach cover (H) and tighten screws (J).
L
K
N M
A
B
C
F
E
D
G
H
J