MacDon Transport D60 - Manual (Page 42)

TOW-BAR
Form 147398 40 Revision J
STEP 16. INSTALL CRADLE
ASSEMBLIES
A. LEFT SIDE CRADLES
Installation of LEFT SIDE cradles is identical for all
headers:
a. Install cradle assembly (A) to header frame leg as
shown using two 3\8 NC X 1.0 LG carriage bolts
and flanged smooth faced lock-nuts at (B) and one
½ NC X 1.0 LG Torx head machine screw and
flanged smooth faced lock-nut at (C).
b. Tighten hardware.
B. RIGHT SIDE CRADLES
I. ALL EXCEPT 30 FT WINDROWER
a. Install cradle assembly (D) to header frame leg as
shown using two 3\8 NC X 1.0 LG carriage bolts
and flanged smooth faced lock-nuts at (E) and one
½ NC X 1.0 LG Torx head machine screw and
flanged smooth faced lock-nut at (F).
b. Tighten hardware.
D
F
E
RH -30’ FLEX SHOWN
LH -30’ FLEX SHOWN
A
C
B