Step 15. assemble tow-bar cradles, A. left side cradle assembly – MacDon Transport D60 User Manual
Page 40
TOW-BAR
Form 147398
38
Revision J
STEP 15. ASSEMBLE TOW-BAR
CRADLES
The cradle assemblies are designed for your
particular header size and application. Refer to
the appropriate section to assemble the LEFT
SIDE and RIGHT SIDE cradles.
A. LEFT SIDE CRADLE ASSEMBLY
I. WINDROWER 30 FT / COMBINE 30 FT
FLEX / ALL 35 FT RIGID
a. Retrieve cradle (A), extension (B), and support (C)
from kit.
b. Assemble
parts
as
shown
with
four
3/8 NC X 1.0 LG carriage bolts (D) and flanged
smooth face lock nuts.
c. Tighten hardware.
II. COMBINE 30 FT RIGID
a. Retrieve cradle (E), extension (F), and support (G)
from kit.
b. Assemble
parts
as
shown
with
four
3/8 NC X 1.0 LG carriage bolts (H) and flanged
smooth face lock nuts.
c. Tighten hardware.
III. COMBINE 35 FT FLEX / ALL 40 – 45 FT
a. Retrieve cradle (J), and support (K) from kit.
b. Assemble
parts
as
shown
with
two
3/8 NC X 1.0 LG carriage bolts (L) and flanged
smooth face lock nuts.
a. Tighten hardware.
H
E
F
G
L
J
K
D
A
B
C