Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 147)

Codabar Enter/Exit Programming Mode
Product Reference Guide 137
CODABAR
The following options apply to the Codabar symbology.
Codabar Enable/Disable
When disabled, the reader will not read Codabar barcodes.
DEFAULT
$CCBEN00(CR)
Codabar = Disable
$CCBEN01(CR)
Codabar = Enable
Codabar Check Character Calculation
Enable this option to enables/disables calculation and verification of an optional Codabar check
character. When disabled, any check character in the label is treated as a data character
DEFAULT
$CCBCC00(CR)
Codabar Check Character Calculation = Don’t Calculate
$CCBCC01(CR)
Codabar Check Character Calculation = Enable AIM stan-
dard check char.
$CCBCC02(CR)
Codabar Check Character Calculation = Enable Modulo
10 check char.