Wasp Barcode WDI4600 2D Product Reference Guide - Manual (Page 22)

Setup Customizing Configuration Settings
12 WDI4600
Customizing Configuration Settings
Configure Interface Settings
If after scanning the interface barcode from the previous table, your installation requires you to
select options to further customize your reader, turn to the appropriate section for your interface
type in
"Configuration Parameters" starting on page 15 .
• "RS-232 Interface" on page 19
• "RS-232/USB-Com Interfaces" on page 24
• "Keyboard Settings" on page 31
Global Interface Features
See " Global Interface Features" on page 17 for settings configurable by all interface types.
Configuring Other Features
If your installation requires different programming than the standard factory default settings,
the following sections of this manual allow configuration of non-interface-specific settings you
might require:
Reading Parameters : Reading Parameters include programming for scanning, beeper and LED
indicators and other universal settings.
1D Symbologies : Includes options concerning the barcode label types (symbologies). These
settings allow you to enable/disable symbologies, set label lengths, require check digit, etc.
Software Version Transmission
The software version of the device can be transmitted over the RS-232 and Keyboard interfaces
by scanning the following label.
Transmit Software Version
RevA