Global interface features, Host commands — obey/ignore, Usb suspend mode – Wasp Barcode WDI4600 2D Product Reference Guide User Manual
Page 27: Host commands — obey/ignore usb suspend mode, Default, Product reference guide 17
Global Interface Features
Enter/Exit Programming Mode
Product Reference Guide
17
GLOBAL INTERFACE FEATURES
The following interface features are configurable by all interface types.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set to
ignore, the reader will ignore all host commands except for those necessary for:
•
service mode
•
flash programming mode
•
keeping the interface active
•
transmission of labels.
DEFAULT
$CIFIH00(CR)
Host Commands = Obey
(Do Not Ignore Host Commands)
$CIFIH01(CR)
Host Commands = Ignore
USB Suspend Mode
This setting enables/disables the ability of USB interfaces to enter suspend mode.
DEFAULT
$CUSSE00(CR)
USB Suspend Mode = Disable
$CUSSE01(CR)
USB Suspend Mode = Enable