Micro pdf417 set length 2, Default – Wasp Barcode WDI4600 2D Product Reference Guide User Manual
Page 201
Micro PDF417
Enter/Exit Programming Mode
Product Reference Guide
191
Micro PDF417 Set Length 2
This feature specifies one of the barcode lengths for
. Length 2 is
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length includes the barcode’s data characters only. Characters can be set from 0001 to 0366
characters (pad with zeroes) in increments of 01. Any value greater than 0366 will be considered
to be 0366.
See
for detailed instructions on setting this feature.
$CMIL2
Select Micro PDF417 Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
representing your
desired character(s). End by scanning the ENTER/EXIT
barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 0366 Characters