Rockwell Automation 1336T Function Block Prog. Manual, Series A/B - Manual (Page 16)

1–4 Getting Started
1336 FORCE — 5.9 August 1995
Step 1 — Add a Limit Block
1. Select the Add Block option from the Function Blocks
pull-down menu.
2. Double click on Limit — [Lib ID: 12 ].
❒ Click on CLOSE .
As shown below, the DriveBlockEditor software now enters one
Limit function block in your new execution list with an
ID# of 1 .
3. Enter the maximum value by clicking on the Value field for
Node 1 and entering +32765 . Press enter to save the value as
shown below.