Limit, Set reset ff, Multiplexer – Rockwell Automation 1336T Function Block Prog. Manual, Series A/B User Manual
Page 20
Advertising
1–8
Getting Started
1336 FORCE — 5.9 August 1995
7. Link the Multiplexer’s sel0 input (node 4), to the Set Reset FF’s
output (node 2).
Click on the
Link To
field for
Node 4
and enter
2:2
.
Press enter to save the value as shown below.
With the Multiplexer function block values and link added, the
function block diagram now appears like this.
Input 1 1:0
Max Val (32765) 1:1
LIMIT
ID # 1
@ Max Lim 1:3
@ Min Lim 1:4
Output 1:5
Min Val (–32765) 1:2
Set Reset FF
ID # 2
Set 2:0
Reset 2:1
Out1 2:2
Out2 2:3
Output 3:6
In1 (32767) 3:0
In2 (–32767) 3:1
In3 3:2
In4 3:3
Sel0 3:4
Sel1 3:5
Multiplexer
ID # 3
Advertising