Rockwell Automation 1336T Function Block Prog. Manual, Series A/B User Manual
Page 25
Advertising
1–13
Getting Started
1336 FORCE — 5.9 August 1995
2. Enter an offset value of
0
for Parameters
400
and
404
. This
allows a value of
±
32767 to traverse the entire
±
10V range for
both analog outputs.
3. Within the link window at the bottom of the screen, double click
on the Par # field associated with Parameter 387.
Link analog output #1, Parameter 387, to Rate Limiter output
node Output (4:5).
The window shown below should appear with entry boxes.
4. Enter a
Task Number
of
1
.
Enter a
Block Number
of
4
.
Enter a
Node Number
of
5
.
Click on
OK
.
Link analog output #3, Parameter 389, to Rate Limiter input node
Input 1 (4:0).
Advertising