Rockwell Automation 1336T Function Block Prog. Manual, Series A/B User Manual
Page 19
Advertising
1–7
Getting Started
1336 FORCE — 5.9 August 1995
Step 3 — Enter a Multiplexer Block
To add a Multiplexer function block:
1. Move the cursor to the left side of the execution list and click.
2. Select the
Add Block
option from the
Function Blocks
pull-down menu.
3. Double click on
Multiplexer — [Lib ID: 21
].
4. Click on
CLOSE
.
As shown below, the DriveBlockEditor software now enters a
Multiplexer function block and gives it an
ID #
of
3
.
5. Enter a value for input 1 by clicking on the
Value
field for
Node
0
and entering
+32767
.
Press enter to save the value as shown below.
6. Enter a value for input 2 by clicking on the
Value
field for
Node
1
and entering
–32767
.
Press enter to save the value as shown above.
Advertising