Rockwell Automation 1336T Function Block Prog. Manual, Series A/B - Manual (Page 17)

1–5 Getting Started
1336 FORCE — 5.9 August 1995
4. Enter the minimum value by clicking on the Value field for
Node 2 and entering –32765 . Press enter to save the value as
shown above.
You have now created the first function block and set the input node
value limits as shown below.
NODE#
BLOCK ID#
Input 1 1:0
Max Val (32765) 1:1
LIMIT
ID # 1
@ Max Lim 1:3
@ Min Lim 1:4
Output 1:5 Min Val (–32765) 1:2
Step 2 — Enter a Set/Reset FF Block
To add a Set Reset FF function block:
1. Move the cursor to the left side of the execution list and click.
2. Select the Add Block option from the Function Blocks
pull-down menu.
3. Double click on Set Reset FF — [Lib ID: 22 ].
4. Click on Close.
As shown below, the DriveBlockEditor software now enters a Set
Reset Flip Flop function block and gives it an
ID # of 2 .