Rockwell Automation 1769-SDN Compact I/O DeviceNet Scanner Module User Manual - Manual (Page 29)

Publication 1769-UM009E-EN-P - August 2009 29
Installation and Wiring Chapter 3
Panel Mounting Using the Dimensional Drawing
All dimensions are in millimeters (inches). Hole spacing tolerance: ±0.4 mm
(0.016 in.).
Compact I/O System with L35E CompactLogix Controller and Power Supply
Compact I/O System with MicroLogix 1500 Base Unit and Processor
15 mm
(0.59 in)
67.5 mm
(2.68 in)
52.5 mm
(2.06 in)
132 mm
(5.20 in)
70.0 mm
(2.76 in) 35.0 mm
(1.38 in)
118 mm
(4.65 in)
35.0 mm
(1.38 in) 35.0 mm
(1.38 in) 35.0 mm
(1.38 in) 35.0 mm
(1.38 in) 52.5 mm
(2.07 in)
DIN Rail
Center Line
Mounting Hole
Dimension
168 mm (6.62 in)
147 mm (5.79 in)
35 mm
(1.38 in.)
35 mm
(1.38 in.) 28.5 mm
(1.12 in.)
13.5 mm
(0.53 in.) 14.7 mm
(0.58 in.)
14
7.
4 mm
(5
.8
in
.)
132 mm (5.19 in.)
118 mm (4.
65
in.)
59
m
m
(2.32 in.
)
59
mm
(2.
32 in.)
12
2.6 mm (4.8
3 in
.)