Input tab – Rockwell Automation 1769-SDN Compact I/O DeviceNet Scanner Module User Manual User Manual
Page 78
Advertising
78
Publication 1769-UM009E-EN-P - August 2009
Chapter 5 Manually Configure the DeviceNet Network
Input Tab
The input tab dialog lets you to define how data from all of the scanner’s slave
devices are mapped into the input image of the controller.
In this example, four input devices are mapped into the scanner’s input image.
The dialog shows each device’s:
• node number.
• catalog number.
• connection type used between the scanner module and the slave device
(strobed, polled, cyclic, or change of state).
• amount of data that will be exchanged (in bytes).
• word within the controller’s input image where the data will appear.
Advertising