Scanlist tab – Rockwell Automation 1769-SDN Compact I/O DeviceNet Scanner Module User Manual User Manual
Page 76
Advertising
76
Publication 1769-UM009E-EN-P - August 2009
Chapter 5 Manually Configure the DeviceNet Network
Scanlist Tab
The Scanlist defines which devices on the DeviceNet network are owned by
the scanner.
Available Devices
These are the devices on the network that have the ability to be slave I/O
devices. Slave-capable devices do not have to be used as slave I/O by a
scanner. They may alternately be used as slave I/O by another scanner module
on the same network, or they may have dual functionality. An example of a
dual function device is the 1761-NET-DNI module. The DNI can be used as
slave I/O, or as a communication interface for PLCs or other DF1 full-duplex
devices.
Advertising