Rockwell Automation 1769-SDN Compact I/O DeviceNet Scanner Module User Manual User Manual
Page 50
Advertising
50
Publication 1769-UM009E-EN-P - August 2009
Chapter 4 Automatically Configure a DeviceNet Network
5.
Set the path to your DeviceNet scanner.
6.
Return the scanner to Run mode, that is bit 0 in the scanner control
output word = 1, and the scanner status display should display the
scanner node address.
The previous example is from RSLogix 5000 programming software; refer to
the appropriate user manuals to determine how to perform explicit messaging
in other PLC platforms.
Advertising