Rockwell Automation 1734-VHSC24 Very High-Speed Counter Modules User Manual - Manual (Page 45)

Publication 1734-UM003B-EN-P - August 2005
Configure Your Module 4-3
The out-of-the-box node setting for 1734 modules is 63. You can
change the setting by using the node commissioning tool. The node
commissioning tool is available either online or offline.
IMPORTANT
If you commission a node online, you must power
down your system before the change takes place.
1. Click here to expand the list
of Specialty modules.
2. Double-click the catalog
number to choose the
module. You can also click
and drag the module name
onto the network.