Rockwell Automation 1734-VHSC24 Very High-Speed Counter Modules User Manual - Manual (Page 54)

Publication 1734-UM003B-EN-P - August 2005
5-2 Access Instantiated Instances
2. From the Service Class Instance Attribute Editor Warning dialog,
click Yes.
You see the Service Class Instance Attribute Editor dialog.
3. From the Service Class Instance Attribute Editor dialog, complete
these actions, referring to the figure.
a. Select the service code.
b. For Recevie Data, select Size and Radix.
c. Enter the class, instance, and attribute.
d. Click Execute to initiate the action.
e. Click Close to finish.
a. Select the service code from the list.
c. Enter the class,
instance and
attribute here.
d. Click Execute to
initiate the action.
b. Select the Receive Data size and radix.