Rockwell Automation 1734-VHSC24 Very High-Speed Counter Modules User Manual - Manual (Page 48)

Publication 1734-UM003B-EN-P - August 2005
4-6 Configure Your Module
2. From the counter module dialog, complete the actions shown in
the figure for the General dialog.
The module’s name appears
here.
Type a description here.
The module’s address appears
here. (This field is read only.)
This dialog also shows the
module’s device identity.
These fields are read-only.
At any point, you can click here to finish
changing configuration parameters.
If configuration changes are made in offline
mode, they do not take effect until the
system goes online..