Rockwell Automation 1734-VHSC24 Very High-Speed Counter Modules User Manual User Manual
Page 46
Advertising
Publication 1734-UM003B-EN-P - August 2005
4-4 Configure Your Module
3. From the DeviceNet - RSNetWorx for DeviceNet dialog,
complete the actions shown in the figure.
1. Go to the pulldown Tools.
Select Node Commissioning.
2. Click Browse.
3. Select the module to change.
4. The node commissioning
dialog returns. It displays the
node number and data rate.
5. Change the node number and
Apply. The dialog then
identifies the new setting.
6. Click Close to continue.
4
2
3
1
5
6
Advertising
This manual is related to the following products: