3 - installation and wiring, Chapter 3, Installation and wiring – Rockwell Automation 1747-BSN Backup Scanner Module User Manual
Page 43: Chapter
1
Publication 1747-UM010B-EN-P - September 2003
Chapter
3
Installation and Wiring
This chapter contains the information necessary to:
•
select the baud rate
•
configure the Backup Scanner
•
insert the Backup Scanner into the SLC chassis
•
wire the RIO and communication links
Compliance to European Union Directives
If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
•
EN 50081-2
EMC - Generic Emission Standard, Part 2 - Industrial
Environment
•
EN 50082-2
EMC - Generic Immunity Standard, Part 2 - Industrial
Environment
This product is intended for use in an industrial environment.